News

Automatic packing machine

The automatic baler has the characteristics of good rigidity and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment foundation engineering. It is widely used in all kinds of waste paper factories, old recycling companies and other units and enterprises, suitable for the packaging and recycling of old waste paper, plastic straw, etc., is a good equipment to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation costs. The packet size and pressure size can be customized according to user requirements.

principle

The automatic baler can realize automatic packaging. The principle is to use plastic packaging tape to wrap the product or package, then tighten and connect the two ends through thermal effect melting machine. The function of the baler is to make the plastic belt tightly attached to the surface of the package to be bound, so as to ensure that the package is not scattered due to improper binding during transportation and storage, and at the same time, it should be bundled neatly and beautifully.

Application: widely used in food, medicine, hardware, chemical industry, clothing, postal and other industries, suitable for carton packaging, paper packaging, parcel letter packaging, medicine box packaging, light industry packaging, hardware tools packaging, ceramic products packaging, auto parts packaging, daily chemical products packaging, stationery packaging, equipment packaging and other large and small goods automatic packaging and binding.

performance introduction

The automatic packer can realize automatic packing, but the table top has no power and needs to be pushed manually before the packaged items can enter the next process through the packer. The principle of the packer is to use the packing tape to wrap the product or package, and then tighten and melt the two ends through the thermal effect or use the packing buckle and other materials to connect the machine. The price of automatic baler is more than twice that of semi-automatic baler.

In addition, the automatic baler also has the following technical features:

1、Flip cover panel, convenient maintenance.

2、the new electric heating device, fast heating, long life.

3、single chip electronic control, complete functions, easy operation.

4、Optional automatic belt feeding device.

Structural Design

1. Integrated circuit design: New circuit design, using plug-in circuit board to control the entire packaging action and ironing head temperature, circuit board replacement is quite convenient, and packaging machine service is convenient.

2. Instant heating and immediate packaging: Innovate the design of high-speed hot melt system, which can make the hot sheet work within 5 seconds and make PET packer enter a good packaging state.

3. Automatic shutdown device, power saving and practical: When the baling action is completed and no operation is stopped within 60 seconds, the baler has a compact structure and the motor will automatically stop and enter the standby state.

4. New brake design: The strapping machine uses a disc brake and a special spring design to ensure a smooth and noise-free belt.

Technical Description

1. The automatic baler adopts the guide belt wheel of the material, which effectively solves the wear of the ordinary plastic guide belt wheel and the problem of the tie belt of the PP belt.

2. A high-strength blade with a hardness of 65 is used, which greatly improves the ability to cut the belt and the life of the blade

3. The use of resin casters, more convenient mechanical movement, in a long time under the load of casters will not be deformed

4. The use of aluminum alloy material frame, the body shell adopts a combined composition, carton packing machine can be based on the size of the packaging to determine the size of the bow.

5. All parts are precision machined by NC machining equipment. Automatic packing machine parts of the solid resistance and connection action of the unified are well guaranteed. More packing machine instructions please see other series.

Principle and characteristics of fully automatic strapping machine (rechargeable strapping machine): Using brand strapping machine technology, it is now designed with dual circuit control for the entire machine, which is more stable and reliable than previous single circuit control performance. The dual circuit control reduces the internal load of the machine's electrical board, and the structure of the strapping machine runs more smoothly and stably between each circuit. As a packaging machine manufacturer, we have superior performance, more reliable quality, simpler and more convenient inspection and debugging, and adopt photoelectric control for the stripping clutch. The working principle of this fully automatic strapping machine is to complete strapping through tightening, heat capacity, tape cutting, and bonding. The packaging machine factory has a wide range of applications, regardless of the size of the packaging, it can be packaged without adjusting the machine. The packaging machine is a mechanical structure, and some use imported packaging machine parts. The rear blade is stable and reliable, easy to adjust, and the packaging machine price is reasonable.

workflow

The belt is delivered to the position→receive the strapping signal→brake release, main motor start(1)→right top knife rises, holding the right belt at the slide plate(2)→‘T’-shaped guide plate backs up(3)→proximity switch senses the retracting probe(4)→main motor stops, brake absorbs(5)→strap retracting motor of the strapping machine rotates, retracting the belt for 0.35 seconds(6)→belt is tightened to strap on the object(7)→main motor starts twice, and the Brake suction (8)→Big pendulum lever pulls the belt twice, tightening the belt (9)→Left top body rises, pressing the lower layer of the belt (10)→Heating piece reaches into the middle of two belts (11)→Middle top knife rises, cutting off the belts (12)→Middle top knife descends (13)→Middle top knife rises again to make the two belts firmly glued together (14)→Middle top knife descends, and left and right top knives descend at the same time (15)→Heating piece reset (16 ) →sliding plate backward (17)→‘T’-type guide plate reset (18)→proximity switch senses tape feeding probe (19)→tape feeding motor starts, driving tape feeding (20)→large pendulum reset (21)→tape in place, head of the tape tops the ‘T’-type guide plate (22)→proximity switch senses double probes (23)→main motor stops, and the brake suction is applied (24)→bundle strapping machine completes a working cycle.

Features

1. The automatic baler can pack large objects with more dust and powder, and heavy objects.

2. All parts are precision machining using NC machining equipment. The rigidity of the components and the unified connection action are well guaranteed, and there will be no problems in long-term use.

3. The power roller can realize unmanned automatic packing.

4. The automatic packing machine adopts concave convex type operation button design, which greatly reduces the damage degree and misoperation of the operation button.

5. The beautiful design of the automatic packer has been praised by the people of the world.

6. Automatic packing machine can be used according to the different purposes of free adjustment of hot head delay loop time, increase the firmness of bonding.

Performance characteristics of automatic packaging machine

The automatic packer (high-table standard type) can realize automatic packaging, but the table top has no power and needs to be pushed manually before the packaged items can pass through the packer. The principle of the baler is a machine that uses a strapping tape to wrap a product or package, and then tightens and melts the two ends through thermal effects or connects them with materials such as buckles. The function of the strapping machine is to make the plastic belt close to the surface of the strapped package, to ensure that the package is not scattered due to improper strapping during transportation and storage, and at the same time, the strapping should be neat and beautiful. Strapping machine price: The price of fully automatic strapping machine or fully automatic strapping machine is more than twice that of semi-automatic equipment.

The standard automatic baler series products all achieve continuous and reliable binding, the plastic belt is tightly attached to the surface of the package, the joint is firm, the electrical safety of the machine, the noise and smoke of the work do not affect the health of the operators.

Automatic paper wrapping machine for profiles, automatic paper wrapping machine for aluminum profiles, and automatic packaging equipment for profiles