News

The circuit board film sticking machine is specially used for sticking protective film and anti-riot film in electronic/communication/semiconductor industries, which can ensure no bubble and scratch film sticking. The self-adhesive parts on the material belt are pulled by the driving device to the stripping plate under the material suction device, led by self-adhesive, stripped by the feeding parts through a series of tensioning guiding devices, and then automatically corrected by the manipulator, and automatically mounted on the workpiece positioned by the jig.

1 Before starting the machine, we must check whether the fastening bolts of the equipment device are loose, and wipe clean all the parts on the machine with thinning water, and later re-adjust the glue, and it is strictly forbidden to store any sundries on the surface of the workbench profile automatic film laminating machine.

2 close the main power switch, check the host start and stop, start and stop the glue, start and stop the winding, drying channel heating, air extraction of the power supply electrical switches and instrumentation pointers, etc., whether it is flexible and reliable, sensitive and correct.

3 when the machine is started, you must master the speed regulation of the drum, drum temperature control, temperature control of the drying channel, strict control of the speed and temperature of the equipment.

4 equipment start-up should be empty running 3 ~ 5 minutes, a few pieces of test film, check its compliance with the requirements and then mass production without the test film, not allowed to profile profile automatic laminating machine allows formal production.

5 consciously do a good job ‘the first three checks’ and often self-check the quality of workpiece operations, can not be a self-check on the film to the end.

6 operation of the hand can only be 30 centimetres away from the drum, can not enter the dangerous place, is strictly prohibited while operating, while talking, mental inattention, clothes and long hair must be tightly coiled, do not fly scattered will be.

The automatic film sticking machine for profiles can be used for individual labeling/film application, or other workstations can be added as auxiliary equipment. The mechanical arm has automatic loading and unloading functions, and the multi station turntable design can be compatible with simultaneous operation of various workstations, avoiding product processes that cannot be met by single station models and achieving production efficiency. The high-strength body can ensure the service life and stability of the equipment. The whole machine runs fast, smoothly, with low noise, and the film sticking accuracy can reach ± 0.5mm. It adopts a human-machine interface, making the operation more user-friendly. The automatic film sticking machine for profiles.