News

Note on the operation instructions of the full profile automatic film sticking machine.

一、the full profile automatic film sticking machine is introduced. The full profile automatic film sticking machine is the abbreviation of the 1 automatic equipment that automatically pasts the protective film on the surface of the product. It can replace the manual protective film sticking and improve the production power and quality. According to the degree of automation, it can be divided into the full profile automatic film sticking machine and the full profile automatic film sticking machine.

二、full profile automatic film machine operation process:.

Central operation principle: when the sensor detects that the product is in place or the foot switch announces the starting signal, the suction head of the label is sucked down, the path is retracted and the label profile automatic film sticking machine is sucked back, the suction head is lowered to stick the product after the path is in place, then it is returned to the original position, a label is put out at the head, waiting for the next film sticking signal, and the sticking action of a label is finished.

Operation process: put the product-> determine that it is in place (equipment detection control or manual control)-> labeling (equipment automatic completion)-> take out the labeled product.

三、the operation process of the full-profile automatic film sticking machine is started up, the equipment label, the correction label belt, the power adjusting eye and the protective film are adjusted.

1. Clean the equipment and its surroundings to check whether there is any looseness.

2. Connect the power line of the profile automatic film sticking machine to the power socket behind the film sticking machine, and open the switch around the power socket, high-precision film sticking machine

3. Connect the other end of the power cord to the AC socket, and the operating voltage is 220v,50Hz.

4. Switch the emergency stop switch of the main panel to the open condition.

5. Connect the high-pressure gas into the air hole (and admit to turn on the switch).

Cold and hot film sticking machine is 1 kind of practical glass machinery and equipment that can be used for cold and hot film sticking. The new design concept is independently developed by Guangzhou Baojun Company, which can bring more convenient operation and use to users. The main working position adopts imported elastic silicone roller to stick the protective film to the glass surface to a better effect, completely eliminating bubbles and glass breakage. Pneumatic design is more convenient for automatic adjustment and balance of film sticking of various thicknesses, greatly improve the efficiency and quality of the film machine, reduce the operating labor intensity.

The self-adhesive parts on the material belt are pulled by the driving device to the stripping plate under the material suction device, led by self-adhesive, stripped by the feeding parts through a series of tensioning guiding devices, and automatically mounted on the workpiece positioned by the jig, and the profile is automatically mounted on the automatic film sticking machine.