一、First, if the ambient humidity is too high or the humidity of the film is too high, the paper of the profile automatic film sticking machine will appear "tight edge", causing the paper to wrinkle.
You can flatten it with a platen, increase the number of times you beat and knead the paper before pasting, and reduce the ambient and pasting temperature.
二、the roller pressure is not uniform, resulting in profile automatic laminating machine paper wrinkles in the lamination process.
In this case, the roller pressure should be corrected before starting the operation.
三、the rubber roller itself is uneven, causing the paper of the profile automatic film sticking machine to wrinkle in the film sticking, the rubber roller should be replaced or the old rubber roller should be ground flat and reused.
四、there is dirt on the rubber roller, causing the paper to wrinkle when sticking the film, the rubber roller should be cleaned in time, and the rubber roller must be kept clean frequently.
五、the tension is too large, the film crimp and tear, causing the paper to wrinkle, the tension should be adjusted appropriately.
六、the paper is skewed, causing the paper to wrinkle when it is coated. In the operation must be careful, so that the paper is flat. Profile automatic film sticking machine
