How to maintain internal and external cleanliness of automatic profile film laminating machines
Foshan Diyi Machinery Technology Co., Ltd. is an innovative machinery manufacturing enterprise integrating design, research and development, manufacturing, sales and service. It is also a leading enterprise in the domestic aluminum profile automation packaging equipment industry.
Profile automatic film sticking machine
The main feature of the automatic profile laminating machine equipment is that the front and rear positions of the paper, the front and rear positions of the glue, and the left and right positions of the film can be adjusted without stopping the machine during production. The adjustment of the 3 position is very convenient and quick, and it is very simple and convenient when changing products. The main part of the profile automatic film sticking machine
The structure is composed of paper feeding parts; positioning position; printing position; film position; paper delivery position. The frame is made of all-steel plate structure, which is durable.
Keeping the inside and outside of the automatic film sticking machine clean is the basic condition to ensure the long-term normal operation and production of the window sticking machine. Therefore, it is necessary to thoroughly remove the foreign matter, dirt and deposits on the internal parts of the film sticking machine surface, and carefully maintain the machine on time.
1. Before the profile automatic film sticking machine starts to work (shift change or work interruption), check the main parts of the machine;
2. The profile automatic film sticking machine should be cleaned every once in a while, and all operating parts should be kept clean;
3. Electrical equipment should be kept clean to prevent oil, water or dust from entering, and pay attention to protect wires from being crushed or broken;
4. Always check whether the moving parts work normally, whether the temperature rise of each rolling bearing and sliding bearing exceeds the specified value, whether the working temperature of each motor exceeds the specified value, and whether the elastic length of the transmission belt and conveyor belt is appropriate. If there is any abnormality, it must be stopped for maintenance and maintenance;
5. When the equipment of the profile automatic film sticking machine is temporarily stopped, the unpainted exposed surface of the machine needs to be protected against corrosion with lubricating oil. When it needs to be used, the oil stain is removed with a wrung-out gasoline cloth;
6. Regularly check the fan and vacuum pump, clean the fan air filter in time if any abnormality is found, and check whether each interface is connected reliably.
