News

The common problems are often stop running (especially when there is no electricity), machine failure (because of machine problems, so the operation of the failure). Let's learn how to maintain the equipment

1. Daily care must keep up with, and machinery must be kept clean.

2. Clean the filter screen of the oil pump regularly to protect the oil pump paddle and pump body. Use a thermometer to check the difference between the temperature of the oil pump and that of the new one, so as to know the relative leakage of the oil pump. No matter how good the sealing condition of the oil suction pipe is, the oil pump has a certain suction condition, so you should pay special attention to the oil in the oil tank.

3. Maintenance is to accumulate experience, usually on the machine with hand induction machine body temperature.

4. If there is a problem, record the maintenance in time to prevent the same failure next time, and have a certain perception of the speed of the machine, so as to avoid the possibility of overhaul.

5. Be sure to keep the hydraulic oil clean. If there are holes on the surface of the mailbox, it should not be repaired. Especially, the holes on the surface of the oil return pipe penetrating into the oil tank must be sealed with rubber.

6. It is necessary to frequently detect the pressure and normal pressure of the machine, and measure the three currents of the motor with the ammeter side to protect the normal operation of the motor, so as to avoid sudden shutdown caused by burning or overload of the motor.

For more details, please visit www.gddyjx.com .